ENGLISH
15
OPERATION
.
OPERATION
Control Panel and Remote Control
Remote Control
1
Power
2
Fan Speed
Use to set the fan speed to Low (F1), MED
(F2), High (F3).
3
ON/OFF Timer
Delay ON
- When the air conditioner is off,
it can be set to automatically turn on from
1 to 24 hours at its previous mode and fan
settings.
Delay OFF
- When the air conditioner is on,
it can be set to automatically turn on from
1 to 24 hours.
NOTE
●
Each press of the
Timer
button advances
the timer by 1 hour. After the last press
the display returns to the temperature
setting.
Operation starts when this buttom is pressed
and stops when you press the buttom again.
Cool
Fan
- Fan circulates air but the compressor
does not run. Use the FAN button to set
the desired fan speed.
Dry
- Dry mode is used to remove humidity
from the room without additional cooling.
Once the set temperature is reached, the
compressor and circulation fan turns off.
Fan speed is pre-set and cannot be
adjusted.
1
4
2
5
3
- Compressor runs and cools the
room. Use the
and FAN buttons to
set the desired temperature and circulation
fan speed.
Energy Saver
- The fan stops when the
compressor stops cooling. Approximately
every 3 minutes the fan will turn on and
check the room air temperature if cooling
is needed.
4
3
2
1
5
7
6
4
Operation Mode Selector
Push the Mode button to rotate between
Energy Saver / Cool / Fan / Dry.
Содержание LW1016ER
Страница 26: ...26 MEMO Memo ...