LG LW1013CR, Руководство пользователя

Страница: 16 / 43

Operating Instructions
Controls
Remote Control Operations
AUTO RESTART
When power is restored after an electrical power failure, the unit will begin to run at its last setting.
1. POWER
• To turn the air conditioner ON, push this button.
To turn the air conditioner OFF, push the button
again.
• This button takes priority over any other button.
• When you first turn it on, the unit is in cool mode,
high fan speed, temperature setting at 22°C.
2. TEMPERATURE SETTING
• Use this button to automatically control the
temperature of the room.
The temperature can be set within a range of
16°C to 30°C by increments of 1°C.
3. MODE
- Every time you push this button, it will cycle
through the following modes: COOL, ENERGY
SAVER and FAN.
- ENERGY SAVER
• The fan stops when the compressor stops
cooling. Approximately every 3 minutes the fan
will turn on and the unit will check the room air to
determine if cooling is needed.
4. FAN SPEED
• Every time you push this button, it advances the
setting as follows: {High(F3) → Low(F1) →
Med(F2) → High(F3)}
5. TIMER
- SHUT-OFF TIME
• You will usually use shut-off time while you sleep.
• With unit running, use Timer to set number of
hours until shut-off.
• For your sleeping comfort, once Time is set, the
Temperature setting will raise 1°C after 30 min,
and 1°C after another 30 min.
• Every time you push Timer button, it advances
the Timer setting as follows: 1 Hour
→
2 Hours
→
etc. →
24
Hours maximum.
- START TIME
• With unit not running, use timer to set number of
hours before unit starts.
• Every time you push Timer button, it advances
the Timer setting as follows: 1 Hour → 2 Hours →
etc.
→ 24
Hours maximum.
6. REMOTE CONTROL SENSOR
Owner’s Manual 16
H
SI
L
G
N
E
Operating Instructions
H
SI
L
G
N
E
Temp
Fan Speed
Timer Mode
1
2
4
3
5
The remote control and control panel will look like those represented in the following pictures.
2
4
C
5
1
6
3