background image

1 Safety Precautions

Do not use strong 
solvents or detergents

Use a dry cloth to the camera when it is
dirty. If it is hard to remove the dirt on
the camera, use a mild detergent and
wipe it gently. 

Before operating, please
check proper temperature,
humidity and power
source ratings.

Use the camera under conditions where
temperature is between -10°C ~ 50°C .

Avoid the camera with
direct sunlight

Do not aim the camera at bright objects.
Never face it with direct sunlight or other
extremely bright objects. Otherwise
blooming or smear may be caused.

Do not attempt to disas-
semble the camera

To prevent electric shock, do not remove
screws or covers. There are no user
serviceable parts inside. Ask a qualified
service personnel for servicing

Handle the camera 
with care

Do not abuse the camera. Avoid striking,
shaking, etc. The camera could be dam-
aged by improper handling or storage. 

Do not expose the cam-

era to rain or moisture

This product is designed for indoor use
or location where it is protected from
rain and moisture. When exposed to
moisture, turn the power off immediate-
ly and ask a qualified service personnel
for servicing. Moisture can damage the
camera and also create the danger of
electric shock. 

Do not expose the camera
in such conditions as
shown below.

Use in a room or area filled with ciga-
rette smoke, dust or gas.

Содержание LVC-DV100 HM

















Отзывы: