background image

2

CAUTION:TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER(OR BACK) NO USER SERVICE-

ABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SER-

VICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the prod-
uct’s enclosure that may be of suffi-
cient magnitude to constitute a risk of
electric shock to persons.

This symbol is intended to alert the
user to the presence of important
operating and maintenance (servic-
ing) instructions in the literature
accompanying the appliance.

Warning

To prevent fire or shock hazard,do not expose the unit to rain or moisture.
To avoid electrical shock,do not open the cabinet. Refer servicing to 
qualified personnel only.
Wiring methods shall be in accordance with the National Electric
Code, ANSI/NFPA 70.

Regulatory Notices For U.S.A

This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules.These limits
are designed to provide reasonable protection against harmful interfer-
ence when the equipment 

is operated in a commercial environment.

This equipment 

generates, uses, and can radiate radio frequency ener-

gy and, if not installed and used in accordance with the instruction manu-
al, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his
own expense.
• A suitable conduit entries, knock-outs or glands shall be provided in the

cable entries of this product in the end user.

• Caution:Danger of explosion if battery is incorrectly replaced. Replaced

only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.

• Holes in metal, through which insulated wires pass, shall have smooth

well rounded surfaces or shall be provided with brushings

.

Warning

This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.

This installation should be made by a qualified ser-
vice person and should conform to all local codes.

Содержание LVC-C513HM






























Отзывы: