LG LU660H-S Series, Руководство по установке

Страница: 15 / 47

ENGLISH
15
Power On Status
• Decide to select working status of TV Set when turn on main power.
• You can set with PWR , STD , LST .
•
PWR
always make TV set On status when turn on main power .
• STD make Stand-by status when turn on main power.
•
LST
make TVSet work like previous power status. As same concept as Power Backup mode; If main
power were turned off in Power On status , TVSet would work in On status. If main power were
turned off in Stand-by status, TVSet would work in Stand-by status.
• If there Block All is both IR Operation and Local Key Operation from Key Management , In order
to provide the option that must be able to turn on the TV in the TV turned off situation, change
the value of the PWR . (Reference the Key Management)
Volume (0 ≤ Min ≤ Start ≤ Max ≤ 100)
• Decide to apply volume policy of Start Volume , Maximum Volume and Minimum Volume
as
On
(Work) or
Off
(Do Not Work).
Start Volume
This entry sets the start volume level when is power on.
•
The level is specified as a number between minimum volume to maximum value.
(Min ≤ Start ≤ Max)
•
The default setting is
Off
(disabled).
• When enabled, if the value is lower then the minimum specified in the minimum
volume entry, the minimum volume entry must be used.
• When enabled, if the value is larger then the maximum specified in the maximum
volume entry, the maximum volume value must be used.
• Access to a volume in Timer Power On of User Menu must be fixed to start volume
when
HTNG HotelMode
(
Enable
) and
Start Volume
(
Off, 0
~
100
) were set
simultaneously.
Maximum Volume
This entry sets the Maximum Volume level the set.
• The level is specified as a number between Minimum Volume to 100 . (Min ≤ Max ≤
100)
• If the command volume up to higher than maximum volume is received, that should be
ignored.
• The default value is 100 .
Minimum Volume
This entry sets the Minimum Volume level the set will produce.
• The level is specified as a number between 0 to Maximum Volume . (0 ≤ Min ≤ Max)
• If the command volume down to lower than minimum volume is received, that should
be ignored.
• The default value is 0 .