background image

ENGLISH

23

Network

(Depending on model)

MAC Address

 

Displays the MAC address (not customizable).

Network Setting

One-click network connection

 

Connects easily to a network.

 

This menu supports to connect to an available network.

To connect to a network through Set Expert

 

 For use in special circumstances such as in offices (in cases where a static IP is used).

Select a network connection, either Wired or Wireless. (Wireless is supported depending on model)

When connecting via Wired, Configures the IP settings of the TV set. You can set the IP address, subnet mask, gateway and DNS server.

When connecting via Wi-Fi, use the one of the following network connection methods.

AP List

Connects to the network selected from the AP List.

Enter the SSID

Connects to the wireless AP typed in.

WPS-PBC

Connects easily when the button of a wireless AP supporting PBC is pressed.

WPS-PIN

Connects easily when the PIN of the wireless AP that you wish to connect to is entered in to the 
AP website.

Advanced Wi-Fi Settings 

After connects Wi-Fi, you can set the IP address, subnet mask, gateway and DNS server.

Содержание LT64 Series




































































Отзывы: