LG LT340C0U Series, Руководство по установке

Страница: 25 / 48

HCEC Setup
1 Go to General → HCEC Setup .
(1) HCEC Setup
• When HCEC Setup is set to CEC Mode , You can adjust IR Decoding , Device ID , StandBy menu and
SIMPLINK feature automatically changed to the on state, and the user can not change this status.
(a) IR Decoding
• When CEC Mode is set to HCEC Mode , the TV decodes and changes it into a CEC Message and sends
it to Command via the HDMI CEC Line. The default value is Disable .
(b) Device ID
• Sets the ID of a device(Logical Address) connected to the CEC Line. You can choose between All and
E .
• The default value is All .
(c) Stand By
• Sets the sending and receiving scenario of the operation about [CEC Op standBy(0x0c)
Command(Device Power)].
• The detailed scenario is described on the table below.
Send Receive
Send Only
O X
Receive Only X O
All
O O
Off
X X
(2) HTNG HotelMode
•
If the following options are selected because of the HTNG command:
* Power On Default, Start Volume , Maximum Volume , Minimum Volume , then the value for the HTNG
HotelMode
changes automatically to
Enable
and, even if the HotelMode is set to
Disable
, the above
options are still affected.
•
If you change it to
Disable
, then the values set by the HTNG will be canceled.
25
ENGLISH