LG LSW900 series Скачать руководство пользователя страница 27

Страница: 27 / 72

Operation and settings

Maintenance

System reboot

Click the [Reboot] button to restart the IP device. It

takes some minutes for the IP device to start again.

Restore and backup

Backup: To take a backup all of the settings.

If necessary, it make possible to return to a

backuped configuration. Click this button

and follow the instructions on the browser

to specify the folder and save the setting

data of the IP device. This configuration

backup can be restored whenever needed.

Restore: Click the [Browse] button and select

the file in which the configuration setting

data is stored and click the [Upload] button.

Click the [Restore] button after success-

fully uploading the backup configuration.

The System settings will be restored to the

uploaded configuration and reboot the

system.

Notes:
•

Backup and Restore can happen on IP device

having the same version of firmware. This

feature is not intended for multi-configura-

tions or for firmware upgrades.

•

[Backup] function is allowed in HTTP proto-

col but not in HTTPS protocol.

Содержание LSW900 series









































































Результаты поиска

Содержание LSW900 series

Отзывы:

Похожие инструкции для LSW900 series

Бренды по названию

Популярные бренды

LG LSW900 series, Руководство пользователя

Результаты поиска

Содержание LSW900 series

Отзывы:

Похожие инструкции для LSW900 series

Бренды по названию

Популярные бренды