22
OPERATION
Timer On/Off
The Timer On/Off serves as an extra timer in the
kitchen that beeps when the set time has run out. It
does not start or stop cooking.
The Timer On/Off feature can be used during any of
the oven control functions.
Setting the Timer (for example to set 5 minutes)
1
Set the oven mode knob to the
Off
position.
2
Press the
Timer On/Off
. 0:00 with
HR
inside it
appears and
Timer
flashes in the display.
3
Press
plus(+)
or
minus(-)
to set the desired
time.
Plus(+)
to increase the time and
minus(-)
to decrease the time.
4
Press
Timer On/Off
or
Start
to start the Timer.
The remaining time countdown appears in the
display.
NOTE
If
Timer On/Off
is pressed, the timer returns to
the time of day.
5
When the set time runs out,
End
shows in the
display. The indicator tones sound every 15
seconds until
Timer On/Off
is pressed.
NOTE
•
If the remaining time is not in the display, recall
the remaining time by pressing
Timer On/Off
.
•
Press
Timer On/Off
twice to set the time in
minutes and seconds.
•
Press
Timer On/Off
once to set the time in
hours and minutes.
Canceling the Timer before the set time has run
out
1
Press
Timer
On/Off
once.
The display returns to the time of day.
Settings
Set the oven mode knob to the
Off
position.
Press and hold
Start Time
for three seconds.
Then press the
Start Time
key repeatedly to toggle
through and change oven settings.
The
Settings
key allows you to:
•
set the hour mode on the clock (12 or 24 hours)
•
enable/disable convection auto conversion
•
adjust the oven temperature
•
activate/deactivate the preheating alarm light
•
set the beeper volume
•
switch the temperature scale between Fahrenheit
and Celsius
Setting the Hour Mode
The control is set to use a 12-hour clock. To reset the
clock to 24-hour mode, follow the steps below.
1
Set the oven mode knob to the
Off
position.
2
Press and hold
Start Time
for three seconds.
3
Press
plus(+)
or
minus(-)
to set the desired
hour mode on the clock.
4
Press
Start
to accept the desired change.
Setting Convection Auto Conversion
When
Conv. Bake
and
Conv. Roast
are selected,
Convection Auto Conversion automatically converts the
standard recipe temperature entered to a convection
temperature by subtracting 25 °F / 14 °C. This
auto-converted temperature shows on the display. For
example, select
Conv. Bake
, enter 350 °F, and 325 °F
shows on the display after preheat.
Convection Auto Conversion is enabled by default. To
change the setting, follow these instructions.
1
Set the oven mode knob to the
Off
position.
2
Press and hold
Start Time
for 3 seconds. Then
press
Start Time
repeatedly until
Auto
appears
in the display.
3
Press
plus(+)
or
minus(-)
to enable or disable
the feature.
4
Press
Start
to accept the change.
Содержание LSSE3026ST
Страница 1: ...2015 08 18 FS1787US English Spanish MFL68881502 116 ...
Страница 59: ...58 MEMO MEMO ...
