manualshive.com logo in svg

LG LSS-3200A, Руководство по обслуживанию

LG LSS-3200A - устройство с высокими техническими характеристиками. Здесь вы можете с легкостью скачать бесплатное руководство пользователя с подробными спецификациями и инструкциями по использованию. Скачайте его с {сайта} и начните использовать ваше устройство лучше сегодня.

Поделиться
Скачать
background image

1-4

SERVICING PRECAUTIONS

CAUTION : Before servicing the STB covered by this service
data and its supplements and addends, read and follow the

SAFETY PRECAUTIONS. NOTE 

: if unforeseen circum-

stances create conflict between the following servicing pre-
cautions and any of the safety precautions in this publica-
tions, always follow the safety precautions.

Remembers Safety First:

General Servicing Precautions

1. Always unplug the STB AC power cord from the AC

power source before:
(1) Removing or reinstalling any component, circuit board, 

module, or any other assembly.

(2) Disconnection or reconnecting any internal electrical

plug or other electrical connection.

(3) Connecting a test substitute in parallel with an elec-

trolytic capacitor.

Caution

: A wrong part substitution or incorrect 

polarity installation of electrolytic capacitors may result
in an explosion hazard.

2. Do not spray chemicals on or near this STB or any of

its assemblies.

3. Unless specified otherwise in this service data, clean

electrical contacts by applying an appropriate contact 
cleaning solution to the contacts with a pipe cleaner,
cotton-tipped swab, or comparable soft applicator.
Unless specified otherwise in this service data, lubrication
of contacts is not required.

4. Do not defeat any plug/socket B+ voltage interlocks with

whitch instruments covered by this service manual might
be equipped.

5. Do not apply AC power to this STB and/or any of its

electrical assemblies unless all solid-state device heat
sinks are cerrectly installed.

6. Always connect test instrument ground lead to the

appropriate ground before connection the test instrument
positive lead. Always remove the test instrument ground 
lead last.

Insulation Checking Procedure

Disconnect the attachment plug from the AC outlet and turn
the power on. Connect an insulation resistance meter(500V)
to the blades of the attachment plug. The insulation resis-
tance between each blade of the attachment plug and acces-
sible conductive parts (Note 1) should be more than 1M-
ohm.

Note 1 : 

Accessible Conductive Parts including Metal pan-

els, Input terminals, Earphone jacks, etc.

Electrostatically Sensitive (ES) Devices

Some semiconductor (solid state) devices can be damaged
easily by static electricity. Such components commonly are
called Electrostatically Sensitive (ES) Devices. Examples of
typical ES devices are integrated circuits and some field
effect transistors and semiconductor chip components.
The following techniques should be used to help reduce the
incidence of component damage caused by static electricity.

1. Immediately before handling any semiconductor compo-

nent or semiconductor-equipped assembly, drain off any
electrostatic charge on your body by touching a known
earth ground. Alternatively, obtain and wear a commer-
cially available discharging wrist strap device, which 
should be removed for potential shock reasons prior to 
applying power to the unit under test.

2. After removing an electrical assembly equipped with ES 

devices, place the assembly on a conductive surface such 
as aluminum foil, to prevent electrostatic charge buildup or 
exposure of the assembly.

3. Use only a grouned-tip soldering iron to solder or unsolder

ES devices.

4. Use only an anti-static solder removal device. Some

solder removal devices not classified a “anti-static” can
generate electrical charges sufficient to damage ES 
devices.

5. Do not use freon-propelled chemicals. These can

generate electrical charge sufficient to damage ES
devices.

6. Do not remove a replacement ES device from its protec

tive package until immediately before you are ready to
install it. (Most replacement ES devices are packaged with
leads electrically shorted together by conductive foam,
aluminum foil, or comparable conductive material).

7. Immediately before removing the protective material from

the leads of a replacement ES device, touch the protective
material to the chassis or circuit assembly into which the
device will be installed.

Caution : Be sure no power is applied to the chassis or
circuit, and observe all other safety precautions.

8. Minimize bodily motions when handling unpackaged 

replacement ES devices. (Normally harmless motion such 
as the brushing together of your clothes fabric or the lifting
of your foot from a carpeted floor can generate static elec-
tricity sufficient to damage an ES device.)

Содержание LSS-3200A








































































































Отзывы:

Нет отзывов

Похожие инструкции для LSS-3200A

Harman Kardon HK 670 Technical Manual preview
HK 670
Бренд: Harman Kardon Страницы: 65
Harman Kardon DPR 2005 Service Manual preview
DPR 2005
Бренд: Harman Kardon Страницы: 127
Harman Kardon AVR 340 Service Bulletin preview
AVR 340
Бренд: Harman Kardon Страницы: 2
Harman Kardon AVR 240 Service Manual preview
AVR 240
Бренд: Harman Kardon Страницы: 155
RadioMaster Zorro Quick Start Manual preview
Zorro
Бренд: RadioMaster Страницы: 10
Alpine CDA-9884R Owner'S Manual preview
CDA-9884R
Бренд: Alpine Страницы: 45
Kathrein CCR 200 Mode D'Emploi preview
CCR 200
Бренд: Kathrein Страницы: 21
Vauxhall Antara Infotainment Manual preview
Antara
Бренд: Vauxhall Страницы: 137
Kaon KTF-I2001CO User Manual preview
KTF-I2001CO
Бренд: Kaon Страницы: 25
ESX XE1200C Owner'S Manual preview
XE1200C
Бренд: ESX Страницы: 16
Outland Technology UWS-3210 Operating Instructions Manual preview
UWS-3210
Бренд: Outland Technology Страницы: 34
VPC i2 MX Series User Manual preview
i2 MX Series
Бренд: VPC Страницы: 2
Novus NR2310D-O/G User Manual preview
NR2310D-O/G
Бренд: Novus Страницы: 72
Arylic Up2Stream Mini User Manual preview
Up2Stream Mini
Бренд: Arylic Страницы: 2
Trio TR- Instruction Manual preview
TR-
Бренд: Trio Страницы: 19
Onkyo TX-DS595 Service Manual preview
TX-DS595
Бренд: Onkyo Страницы: 52
Yaesu FTA-720 Operating Manual preview
FTA-720
Бренд: Yaesu Страницы: 68
Pyle PLMRKT32 Owner'S Manual preview
PLMRKT32
Бренд: Pyle Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды