LG LSN HSV4 Series Скачать руководство пользователя страница 20

Страница: 20 / 56

Multi F Standard W

all-Mounted Indoor Unit

Due to our policy of continuous product innovation, some specifications may change without notification.

MAX

MULTI

GENERAL INSTALLATION GUIDELINES

WARNING

• Mounting hardware must be securely installed to prevent the chas-

sis falling from its installation location. There is risk of personnel

injury or property damage from falling equipment.

• When choosing a location for the wall mount plate, be sure to take

into consideration routing of wiring for power outlets within the wall.

Touching wiring can cause serious bodily injury, or death.

• Installation work must be performed by trained personnel and in

accordance with all local or other applicable codes. There is risk of

injury to personnel from incorrect installation.

Note:

• Ensure the unit is properly installed. Incorrectly installed units can

result in degraded performance or an inoperative unit/system.

• Use a level indicator to ensure the installation plate and chassis

are installed on a level plane.

• If the unit is installed near a body of water, certain components

are at risk of being corroded. Appropriate anti-corrosion methods

should be taken for the unit and all components.

Install Wall-Mounted IDU Chassis

Mounting the Installation Plate

The mounting wall should be strong and solid enough to protect the

unit from vibration. It should securely hold the installation plate and

the weight of the chassis.
1. Determine the installation location.
2. Refer to Figure 3 or Figure 4 for the appropriate mounting

diagram.

3. Mount the installation plate on the wall using the Type “A” screws.

If mounting the unit on concrete, consider using anchor bolts.

Use a level to ensure the plate is level.

4. Always mount the installation plate horizontally. Measure the wall

and mark the centerline using thread and a level.

Figure 3: Installation Plate for LMN077HVT, LSN090HSV4,

LSN120HSV4, and LMN157HVT Units.

Installation Plate

Frame

Hooks

Type "A" Screws

Figure 4: Installation Plate for LSN180HSV4 and LMN247HVT Units.

Figure 5: Installation Plate Attaching Screw Placement.

Ø2-3/4 inches

2-23/32 inches

2-7/32 inches

Right rear

piping

Left rear

piping

Installation Plate

Measuring Tape

Measuring Tape Hanger

Place a level on raised tab

Unit Outline

8-5/32 inches

4-1/8 inches

18-1/8 inches

22-7/16 inches

Ø2-9/16

5-3/16

3-11/16

Right rear piping

Left rear piping

Place a level on raised tab

Unit Outline

8-1/2

6-7/8

17-3/8

Ø2-9/16

A-Type

B-Type

Содержание LSN HSV4 Series

























































Результаты поиска

Содержание LSN HSV4 Series

Отзывы:

Похожие инструкции для LSN HSV4 Series

Бренды по названию

Популярные бренды

LG LSN HSV4 Series, Руководство по установке

Результаты поиска

Содержание LSN HSV4 Series

Отзывы:

Похожие инструкции для LSN HSV4 Series

Бренды по названию

Популярные бренды