- 32 -
English
Français
MAINTENANCE
CARE &CLEANING
Changing the Oven Light
The oven light is a standard 40-watt appliance bulb. It will
come on when the oven door is open. When the oven door is
closed, press LIGHT to turn it on or off. It will not work
during the Self-Clean cycle.
To replace:
1.
Unplug range or disconnect power.
2.
Turn the glass bulb cover in the back of
the oven counterclockwise to remove.
3.
Turn bulb counterclockwise to remove
from socket.
4.
Replace bulb and bulb cover by turning clockwise.
5.
Plug in range or reconnect power.
Painted and Body Parts, and
Decorative Trim
For general cleaning, use a cloth with hot and soapy water.
For more difficult soils and built-up grease, apply a liquid
detergent directly onto the soil. Leave on soil for 30 to 60
minutes. Rinse with a damp cloth and dry.
DO NOT
use
abrasive cleaners on any of these materials; they can scratch.
Stainless Steel Surfaces
(on some
models)
Do not use a steel-wool pad; it will scratch the
surface.
1.
Shake bottle well.
2.
Place a small amount of Stainless Steel Appliance Cleaner
or polish on a damp cloth or damp paper towel.
3.
Clean a small area, rubbing with the grain of the stainless
steel if applicable.
4.
Dry and buff with a clean, dry paper towel or soft cloth.
5.
Repeat as necessary.
Broiler Pan and Grid
Do not clean the broiler
pan or grid in a self-
cleaning mode.
After broiling, remove the
broiler pan from the oven.
Remove the grid from the pan.
Carefully pour out the grease
from the pan into a proper container.
Wash and rinse the broiler pan and grid in hot
water with a soap-filled or plastic scouring pad.
If food has burned on,sprinkle the grid with cleaner while
hot and cover with wet paper towels or a dishcloth. Soaking
the pan will remove burned-on foods.
Both the broiler pan and grid may be cleaned with a
commercial oven cleaner.
Both the broiler pan and grid can also be cleaned in a
dishwasher.
Oven Racks
Remove the oven racks
before the Self-Clean cycle
for cleaning. If left, clean
by using a mild, abrasive
cleaner. Rinse with clean
water and dry.
If the racks are cleaned in
the Self-Clean cycle, their
color will turn slightly blue
and the finish will be dull. After the Self-Clean cycle is
complete, and the oven has cooled, rub the sides of the racks
with wax paper or a cloth containing a small amount of oil
(this will make the racks glide easier into the rack tracks).
Do not store a soiled broiler
pan and grid anywhere in the
range.
If a mineral oil-based stainless steel appliance cleaner has
been used before to clean the appliance, wash the surface
with dishwashing liquid and water prior to using the
Stainless Steel Appliance Cleaner or polish.
Note:
WARNING
• Before replacing your oven light bulb,
DISCONNECT the electrical power to the
range at the main fuse or circuit breaker
panel.
- Failure to do so can result in severe personal
injury,death or electrical shock.
• Make sure oven and bulb are cool.
WARNING
• DO NOT step or sit on the door and install
the Anti-Tip Bracket packed with range.
- The range could be tipped and injury might result
from spilled hot liquid, food, or the range itself.
- If the range is pulled away from the wall for
cleaning, service, or any other reason, ensure that
the Anti-Tip Device is properly reengaged when
the range is pushed back against the wall.
