LG LSC27926 Скачать руководство пользователя страница 91

Страница: 91 / 101

3. FAN SHROUD GRILLE

1) Loosen two screws after disconnecting a cap screw of a

grille fan (U) with a screwdriver balde.

2) Disassembly of a grille fan (U) : Pull forward after

opening hook at

part with a screwdriver blade.

3) Disconnect housing A of a grille fan (L) from the main

body.

4) Disassembly of a grille fan (L) : Hold upper part of a

grille fan (L) and pull forward carefully.

5) Loosen two screws.
6) Disassembly of shroud. F (U) : Disconnect housing of B

after removing two rail guides with a screwdriver blade.

7) Disassembly of shroud. F (U) : Hold upper part and pull

forward.

8) Check foam sticking conditions around a shroud, F (U)

and F (L) during assembling. If damaged, torn, or badly
stuck, assemble with a new one after sealing well.

4. ICEMAKER ASSEMBLY

1. Dispenser Model

1) How to disassemble:

(1) Remove ice bank from the freezer compartment.
(2) Loosen two screws on the upper part of icemaker

bracket.

(3) Disconnect icemaker bracket so that it can slide

forward.

(4) Disconnect icemaker housing and sensor housing.
(5) Disconnect icemaker horizontally by pressing bracket

hook part. ( Don ’t disassemble further. The set value
may be changed.)

2) How to assemble : The assembly is the reverse order of

the above disassembly.

Note :

When the ice tray is not horizontal after assembly,
assembly must be wrong. Check and assemble
again.

Bracket, Ice Maker

Hook

Ice Maker Unit

Lever

Tray, Ice

Sensor

Insulation

Cover, Sensor

-91-

Содержание LSC27926






































































































Результаты поиска

Содержание LSC27926

Отзывы:

LG LSC27926, Руководство по обслуживанию, Страница: 91 / 101

Результаты поиска

Содержание LSC27926

Отзывы: