17
ENSURING PROPER AIR CIRCULATION
In order to ensure proper temperatures, air MUST flow
between the refrigerator and freezer sections.
• Cool air enters the freezer through the vents located
at the top of the compartment and exits through the
vents located behind the freezer drawers.
• Cool air from the freezer section enters the fresh food
section through vents located at the top of the
compartment. The air moves down throughout the
compartment and exits through the vents located
behind the crisper drawers.
•
Do not block any of these vents
with food packages.
If the vents are blocked, airflow will be interrupted and
temperature and moisture problems may occur.
IMPORTANT:
Because air circulates between both sections, any odors
formed in one section will transfer to the other. You
MUST thoroughly clean both sections to eliminate odors.
To prevent odor transfer and dried out food, wrap or
cover foods tightly. (See the
Food Storage Guide
section for details.)
NOTE:
If you close the
refrigerator door, you may see
the freezer door open and
close again due to pressure
from internal air flow.
PRIOR TO USE
1.
Clean your refrigerator thoroughly and wipe off dust
accumulated during shipping.
2.
Install accessories such as ice cube bin, drawers,
shelves, etc., in their proper places. They are packed
together to prevent possible damage during shipment.
3.
Let your refrigerator run for at least 2 or 3 hours
before putting food in it. Check the flow of cold air in
the freezer compartment to ensure proper cooling.
Your refrigerator is now ready for use.
CONTROL PANEL FEATURES
REFRIGERATOR AND FREEZER CONTROLS
It is recommended to maintain the temperature of 37ºF
(3ºC) in the refrigerator compartment and 0ºF (-18ºC)
in the freezer compartment. To adjust temperatures,
press Refrigerator graphic and Freezer graphic. The
lower the number, the colder the compartment will be.
NOTE:
The refrigerator temperature can be modified
from 33ºF to 46ºF (0ºC to 8ºC). The freezer
temperature can be modified from -6ºF to 8ºF
(-21ºC to -13ºC).
To change temperature unit from Fahrenheit to Celsius
or from Celsius to Fahrenheit press and hold
Refrigerator and Freezer buttons.
Display Off Mode
The display lights up and stays lit when the refrigerator is
plugged in for 60 seconds. After the display lights all off
except the dispenser icon selected (CRUSH, WATER or
CUBE) and the display only lights when door is opened
or display button is pressed. Display turn off 20 seconds
after door is closed or display button pressed. You can
change the display always ON pressing “FREEZER” and
“ICE PLUS” buttons at the same time for 5 seconds. A
tone will sound indicating that the display is ON (Display
Off Mode Deactivate). Activate the Display Off Mode in
same manner as deactivation.
USING YOUR REFRIGERATOR
