LG LSB5611SB, Инструкция по эксплуатации и кулинарная книга

Страница: 18 / 40

- 18 -
English
Français
OPERATION (OPTIONS)
1. Press COOK & WARM pad for 3
seconds.
2. Press “4” pad. The display will
show “PrE On”.
3. Press “4” pad to switch between
the “On” and “OFF”.
4. Press START pad to accept the
change.
To set smart oven light on/off
SETTING PREHEATING ALARM
L IG HT ON / O F F
The interior oven light automatically turn on when the oven
door is opened.
When oven reaches set-temperature after preheat, the oven
notifies preheat-end by flashing oven lamp until door is
opened.
You can activate or deactivate smart oven light feature.
Default Setting is on.
1. Press and hold “BAKE” pad for 3
seconds.
2. To increase the temperature use
the number pads to enter the
desired change.
(Example 20°F :
2, 0 ).
“20°” will be displayed.
3. Press START to accept the
temperature change and the
display will return to the time of
day. Press
CLEAR/OFF to reject
the change if necessary.
To increase the oven temperature:
1. Press and hold “BAKE” pad for 3
seconds.
2. To decrease the temperature use
the number pads to enter the
desired change.
(Example -20°F :
2, 0 ) and then
press BAKE pad once.
“- 20°” will be displayed.
3. Press START to accept the
temperature change and the
display will return to the time of
day. Press
CLEAR/OFF to reject
the change if necessary.
To decrease the oven temperature:
THERMOSTAT ADJUSTMENT
The temperature in the oven has been preset at the factory.
When first using the oven, be sure to follow recipe times and
temperatures. If you think the oven is too hot or too cool, the
temperature in the oven can be adjusted. Before adjusting,
test a recipe by using a temperature setting that is higher or
lower than the recommended temperature. The baking
results should help you to decide how much of an
adjustment is needed.
The oven temperature can be adjusted from -35°F(-19°C) to
35°F(19°C) .
The thermostat adjustments made with this feature
will just change Bake, Convection Bake and
Convection Roast temperature.
Note:
1. Press the COOK & WARM pad for
3 seconds.
2. Press “5” pad. The display will
show “Auto On”.
3. Press “5” pad to switch between
the “On” and “OFF”.
4. Press START pad to accept the
desired change.
To set the feature ON/OFF
SETTING CONVECTION AUTO
CONVERSION FEATURE
When using convection bake, the Convection Auto
Conversion feature will automatically convert entered
regular baking temperatures to convection baking
temperatures.
This feature is activated so that the display will show the
actual converted (reduced) temperature. For example, if you
enter a regular recipe temperature of 350°F and press the
START pad, the display will show the converted
temperature of 325°F.