LG LS521N-B1 Скачать руководство пользователя

Страница: 5 / 40

1.  Read these instructions.
.  Keep these instructions.
.  Heed all warnings.
.  Follow all instructions.
5.  Do not use this apparatus near water.
6.  Clean only with dry cloth.
7.  Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

1. Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

1. Unplug this apparatus during lightning storms or

when unused for long periods of time.

1. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped.

Important Safety Instructions

Содержание LS521N-B1









































Результаты поиска

Содержание LS521N-B1

Отзывы:

Похожие инструкции для LS521N-B1

Бренды по названию

Популярные бренды

LG LS521N-B1, Руководство пользователя

Результаты поиска

Содержание LS521N-B1

Отзывы:

Похожие инструкции для LS521N-B1

Бренды по названию

Популярные бренды