LG LS300N-B1, Инструкция по эксплуатации

Страница: 10 / 15

19
OSD MENU -
FUNCTION > DAY & NIGHT
20
Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
OSD MENU -
FUNCTION > DAY & NIGHT
•
AUTO : The camera selects black and white mode.
If the picture is dark, on color mode if the picture is
bright enough.
Please select 'AUTO' and then press the SETUP
button to DAY&NIGHT setting.
- DELAY :
Delay time when the DAY&NIGHT function starts or stops.
(0~63 sec)
- START LEVEL :
Set the brightness level where the DAY&NIGHT start to
operate. 0(high light)~255(low light)
- END LEVEL :
Set the brightness level where the DAY&NIGHT function
stop operating. 0(high light)~255(low light)
※
Operating Conditions
1) Due to the connection with the value of AGC, it doesn't work when "AGC OFF".
2) Delay time shall be more than 1sec.(at least).
(with the value "0", it is in "DAY MODE" continuously.)
3) Because a start level is connected with the value of AGC, A start level shall be set less
than the value of AGC.
4) A start level shall be higher than an end level.
•
COLOR : Color mode enabled.
•
B / W : Black and White mode enabled.
Please select 'B/W' and then press the SETUP
button to BURST the setting.
- BURST ON :
BURST signal 'ON'
- BURST OFF :
BURST signal 'OFF'
FUNCTION
CAMERA ID
MIRROR
DAY NIGHT
MOTION
PRIVACY
GAMMA
LANGUAGE
RESET
RETURN
OFF
OFF
AUTO
OFF
OFF
0.45
ENGLISH