6 | IntroductIon
Single Zone High Efficiency W
all Mount Engineering Manual
Due to our policy of continuous product innovation, some specifications may change without notification.
©
LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
Benefits of Single Zone
Wall Mount Systems
• Available from 9,000 - 18,000 Btu/h
• Inverter technology
• All season use - heat pump models for both
cooling and heating capabilities
• operating range for outdoor units of 14°F to
118°F (DB) in cooling and -4°F to 65°F (WB)
in heating
• operating range for indoor units of 53°F to
75°F (WB) in cooling and 60°F to 86°F (DB)
in heating
• Quiet operation inside and outside
• Duct-free split system
convergence of technological Innovation with Flexibility and Style
Single zone inverter
Wall Mount Systems
Choosing an LG single zone wall mount
product provides a system designer an
edge to engineer a system with individual
control, and design flexibility with
advanced controls.
Single zone systems are available
in a nominal capacity range of 3/4 to
1-1/2 tons. These are best suited for
applications with zones that require
heating or cooling, such as residential,
and small business office buildings.
Single zone wall mount outdoor
and indoor units are available in
208–230V/60Hz/1Ph.
Adaptable and flexible
Single zone wall mount duct-free split
(DFS) systems allow cooling or heating
for the entire residence or just a single
room without the need for invasive
ductwork. There is minimal renovation
needed.
Long refrigerant piping lengths allow
for extra design flexibility in indoor unit
installation.
These units may be used for a number of
residential or commercial environments
such as:
• Older homes
• New home construction
• Office buildings
• Restaurants
• Hospitals/Medical facilities
• Schools
• Nursing homes
• Retail establishments
• Houses of worship
inverter Technology
Inverter variable-speed duct-free split
systems are measurably quieter and
consume less energy than conventional
air conditioners. The inverter compressor
ramps up or down to match the required
room capacity and maintain the comfort
level. When the selected temperature
is reached, the inverter compressor
operates at low speed to maintain that
comfort level, thereby using less energy.
ArcHiTecTUrAl APPeAl