4. Moving Refrigerator Handle
Remove caps (7), (8) and (9).
Loosen the two top screws (5)
Slide up the handle and remove it (6).
Attach the screws and handle on the right side.
Attach the removed caps (8) and (9) on the left side.
Attach the cap (7) on the right side.
7. After Completing the Job
Make sure that the four corners of the door gasket are
not folded over. To ensure a good seal, apply a small
amount of silicon grease on the corner gaskets.
REFRIGERATOR INSTALLATION
5. Attaching Refrigerator Door
Attach the base grille (1).
Attach the door (3) to the bottom hinge pin.
Attach the middle hinge (4) on the opposite side with the
3 screws (5).
6. Attaching Freezer Door
Place the door (8) onto the middle
hinge pin (7).
Attach the top hinge (10) with 3 screws.
Reinstall top hinge cover (11).
13
Remove screw (2) from left side to right side.
A-TYPE
B-TYPE
Remove cap (7) and cap (8).
Loosen the screws (5) (two on the top and two on the
bottom), take off the handle (5), and attach it on the
right.
Attach the removed cap (8) on the left.
Attach cap (7) on the top right side.
Содержание LRTC19314
Страница 31: ...NOTES 31 ...
Страница 32: ......