LG LRSDS2706 Series, Руководство пользователя

Страница: 26 / 64

26 OPERATION
Ice and Water Dispenser
Before Using the Ice and Water
Dispenser
CAUTION
may play with or damage the controls.
160 cubes) after installation. The first ice and
water dispensed may include particles or odor
from the water supply line or the water tank.
This is also necessary if the refrigerator has not
been used for a long time.
2.5 gallons of water
(flush for approximately 5 minutes) after
installation. Do not dispense the entire 2.5 gallon
amount continuously. Press and release the
dispenser pad for cycles of 30 seconds ON and
60 seconds OFF. This is also necessary if the
refrigerator has not been used for a long time.
the water supply and contact an LG Electronics
Customer Information Center.
deep. Ice may jam in the ice passage and
refrigerator performance may be affected.
use a fragile container.
ace heavy objects on the
NOTE
the refrigerator doors is open.
filter and water supply. If the problem continues,
contact an LG Electronics Customer Information
Center. Do not use the water or ice until the
problem is corrected.
water or other beverages. Splashing may occur if
ice is dispensed into a glass that already
contains liquid.
after dispensing. Hold
the cup beneath the dispenser for a few seconds
after dispensing to catch all of the drops.
ppropriate distance from
the dispensers. Tall, narrow glasses should be
held far enough from the ice outlet to prevent
ice from jamming in the ice chute. A container
with a very small opening should be held as
close to the dispenser as possible to avoid
spilling.
Using the Ice and Water Dispenser
1
Press the icon for the desired dispenser mode
a
. The LED over the selected icon turns on.
2
Press the dispenser paddle
b
with a glass or
other container to dispense cubed ice, water
or crushed ice.
Cleaning the Dispenser
Cleaning the Ice and Water Outlet
Wipe the water outlet
a
or ice outlet
b
frequently
with a clean cloth as it may get dirty easily.
NOTE
minutes every hour to clean the dispenser
outlet. Press and hold the Self Care button for 3
seconds to manually activate it.