
16
INSTALLATION
2
Fit the hinge
a
over the hinge lever latch
b
and slot it into place. Rotate the lever
c
counterclockwise to secure the hinge.
3
Connect all the wire harnesses
d
.
NOTE
• The number of wire harnesses may vary
depending on the model.
Assembling the Left Refrigerator
Door
CAUTION
• Install the left refrigerator door after the right
door is installed.
1
Make sure that the plastic sleeve is inserted in
the bottom of the door. Install the refrigerator
door onto the middle hinge.
2
Fit the hinge
a
over the hinge lever latch
b
and slot it into place. Rotate the lever
c
clockwise and fasten the hinge.
3
Connect all the wire harnesses and the
ground screw.
4
Push the water supply tube into the hole on
the top case and pull it through the backplate.
5
Hold the water supply connection and gently
push in the collet
d
to connect the water
supply line as shown. Insert the tube at least
5/8 inch (15 mm) into the connector. Insert
the clip on the joint to fasten the tube in place.
us_main.book.book Page 16 Tuesday, July 7, 2020 3:07 PM