21
INSTALLATION
ENGLISH
3
Connect all the wire harnesses and the
ground screw.
4
Push the water supply tube into the hole on
the top case and pull it through the backplate.
5
Hold the water supply connection and gently
push in the collet
d
to connect the water
supply line as shown. Insert the tube at least
5/8 inch (15 mm) into the connector. Insert
the clip on the joint to fasten the tube in place.
• Connections may vary by model.
† This feature is only available on some
models.
NOTE
• Disassembling/Assembling the Water Lines
e
Collet
f
Tube
g
Insert line
h
Clip
• Gently press the collet and insert the tube until
only one line shows on the tube.
6
Set the cover
i
in place. Insert and tighten
the cover screw
j
.
Type A
Type B
Содержание LRMVS2806D
Страница 72: ...72 Memo ...
Страница 73: ...73 Memo ...
Страница 74: ...74 Memo ...
Страница 75: ...75 Memo ...