12
INSTALLATION
Dimensions and Clearances
• Check the dimensions of the appliance and the installation path to ensure there is sufficient room to
move the refrigerator through doors or narrow openings.
• If an opening is too narrow to fit the refrigerator through, remove the refrigerator doors. See Removing/
Assembling the Doors and Drawers in this manual.
• The installation location chosen for the refrigerator should allow space behind the unit for connections
and airflow and space in front to open the doors and drawers.
• Too small of a distance from adjacent items may result in lowered freezing capability and increased
electricity consumption charges. Allow at least 24 inches (610 mm) in front of the refrigerator to open the
doors, and at least 2 inches (50 mm) between the back of the refrigerator and the wall.
Removing/Assembling
Doors and Drawers
If the entrance door is too narrow for the
refrigerator to pass through, remove the
refrigerator doors and move the refrigerator
sideways through the doorway.
WARNING
• Use two or more people to remove and install
refrigerator doors and freezer drawers.
• Disconnect the electrical supply to the
refrigerator before installing.
• Do not put hands, feet or other objects into the
air vents or bottom of the refrigerator.
• Be careful when handling the hinge and hinge
lever.
• Remove food and bins before detaching doors
and drawers.
• Do not hold the handle when removing or
replacing doors and drawers as the handle may
come off.
Tools Needed
• 3/32 in. Allen wrench
-
Dimension/Clearance
LRMNC1803*
LRMNC1813*
A
Depth without Handle
28 3/4" (734 mm)
B
Width
32 7/8" (835 mm)
C
Height to Top of Case
68 5/8" (1742 mm)
D
Height to Top of Hinge
70 3/8" (1787 mm)
E
Back Clearance
2" (50 mm)
F
Depth without Door
24" (610 mm)
G
Depth (Total with Freezer Drawer Open)
45 3/4" (1162 mm)
H
Depth (Total with Door Open 90°)
41 7/8" (1063 mm)
I
Front Clearance
24" (610 mm)
B
A
C
D
F
H
E
G
I
us_main.book.book Page 12 Tuesday, July 7, 2020 1:59 PM
