20
INSTALLATION
Middle Hinge
Pin
Middle Hinge
Bracket
Insert the decorative screw into the outer
hole on the right side of the flange. Attach
the cover on the right side. Cover is force-
fitted.
Assemble the right hinge cap with the two
screws.
Assemble the left hinge cover with the
two screws .
Loosen the two screws and remove the
left hinge cap.
Place the refrigerator door down over the
hinge pin on the middle hinge pin bracket.
11
15
12
13
Decorative
Screw
• The left top hinge, right hinge cap and left hinge
cover are provided for reversing doors.
NOTE
Connecting the Water Line
Before Beginning
This water line installation is not covered by the
refrigerator warranty. Follow these instructions
carefully to minimize the risk of expensive water
damage.
If necessary, call a qualified plumber to correct
water hammer before installing the water supply
line to the refrigerator. Water banging in the
pipes, or water hammer in residential plumbing
can cause damage to refrigerator parts and lead to
water leakage or flooding.
• Turn the icemaker OFF if the refrigerator will be
used before the water line is connected.
• Do not install the icemaker tubing in areas
where the ambient temperatures fall below
freezing.
WARNING
• Connect to potable water supply only.
Fit the hinge over the hinge lever latch
and slot it into place. Rotate the lever
clockwise to secure the hinge.
14