background image

4-3 OLP (OVERLOAD PROTECTOR)

4-3-1 Definition of OLP

(1) OLP (OVERLOAD PROTECTOR) is attached to the

Compressor and protects the Motor by opening the
circuit to the Motor if the temperature rises and
activating the bimetal spring in the OLP.

(2) When high current flows to the Compressor motor, the

Bimetal works by heating the heater inside the OLP,
and the OLP protects the Motor by cutting off the
current flowing to the Compressor Motor.

4-3-2 Role of the OLP

(1) The OLP is attached to the Sealed Compressor used

for the Refrigerator. It prevents the Motor Coil from
being started in the Compressor.

(2) For normal operation of the OLP, do not turn the Adjust

Screw of the OLP in any way.

4-4 TO REMOVE THE COVER PTC

1) Remove the Cover Back M/C.

(2) Remove the screw on Cover PTC.

(3) Remove two Housings on upper part of Cover PTC.

(4) Take out the cover PTC from upper to lower position

like 

.

(5) Turn 45° in the direction of 

and take it out.

(6) Assembly in reverse order of disassembly.

- 8 -

Part

Customer part
number

Lot code/
date code

330 FBYY

-S1  BOX98

12345678

Physical
termination
part number

Electrical

characteristics

part number 

No.          Name

Base, phenolic
(UL  94 V-0 rated)
Movable arm support, plated steel
Stationary contact support,
plated steel
Heater support, plated steel
Heater, resistance alloy
Disc, thermostatic alloy
Movable arm, spring temper 
copper alloy
Contact, movable, silver on copper
Contact, stationary, silver on copper
Slug, plated steel
Cover, polyester
(UL  94 V -0 rated)
Pin connector, plated copper alloy
(To engage 2.33/2.66 mm dia. pin)
Quick-connect terminal, brass,
conforms to UL 310, MEMA
      DC-2, DIN 46344

(OVERLOAD PROTECTOR 

cross section)

Figure  13

1

2

Содержание LRDC20731ST
































































Отзывы: