OPERATION
Control Panel and Remote Control
ENGLISH
8
6
5
4
3
2
1
1
1
2
5
4
2
7
6
3
Power ( )
Turns the air conditioner on and off.
A chime sounds to confirm you have turned it on
or off.
Mode
Press this button repeatedly to toggle through
and select the operating mode. Modes include
Cool, Dry (dehumidify), Fan, and Heat. An LED
illuminates to indicate the selected mode. The
default mode is Cool.
Cool ( )
Compressor runs and cools the room. Use the
∧
/
∨
and Fan Speed buttons to set the desired
temperature and fan speed.
Dry ( )
Use the Dry mode to remove humidity from the
room without additional cooling. The fan speed is
preset and cannot be adjusted.
Fan ( )
Fan circulates air but compressor does not run.
Use the Fan Speed button to set the desired fan
speed to either High or Low.
Heat ( )
Compressor runs and heats the room. Use the
∧
/
∨
and Fan Speed buttons to set the desired
temperature and fan speed.
NOTE
• To protect the compressor, the fan and
compressor may stop for a short time if you
switch modes from Cool to Heat or vice versa.
NOTE
• Available functions may vary by model.
• The number and location of LEDs on the control panel may vary by model.
OPERATION
17
Содержание LP0820WSR
Страница 25: ......