MODEL
LND3210R series
Please read this manual carefully before operating
your set and retain it for future reference.
Warning:
Do not install this equipment in a
confined space such as a bookcase or similar
unit.
Warning:
Wiring methods shall be in
accordance with the National Electric Code,
ANSI/NFPA 70.
Warning:
This is a class A product. In a
domestic environment this product may cause
radio interference in which case the user may
be required to take adequate measures.
Warning:
To reduce a risk of fire or electric
shock, do not expose this product to rain or
moisture.
Warning:
Please adopt the power adapter
which can meet the safety extra low voltage
(SELV) standard. And source with DC 12 V or
AC 24 V (depending on models) according
to the IEC60950-1 and Limited Power Source
standard.
Warning:
Install the camera on a ceiling or wall
where can withstand the weight of 5 times of
the camera including mounting bracket.
Caution:
This installation shall be made by a
qualified service person and shall conform to
all local codes.
Caution:
To avoid electrical shock, do not
open the cabinet. Refer servicing to qualified
personnel only.
Caution:
The apparatus shall not be exposed
to water (dripping or splashing) and no objects
filled with liquids, such as vases, shall be placed
on the apparatus.
Caution:
Make sure the power supply voltage
is correct before using the camera.
Caution:
Do not drop the camera or subject it
to physical shock.
Caution:
The sensor may be burned out by
a laser beam, so when any laser equipment is
being used, make sure that the surface of the
sensor not be exposed to the laser beam.
Caution:
While shipping, the camera should be
packed in its original packing.
The Power Plug is the disconnecting device.
In case of an emergency, the Power Plug
must remain readily accessible.
Contact office for compliance of this product:
LG Electronics European Shared Service Center B.V.
European Standard Team
Krijgsman 1
1186 DM Amstelveen
The Netherlands
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
REGULATORY INFORMATION: FCC Part 15
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
•
A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this
product in the end user.
•
Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or
equivalent type recommended by the manufacturer. Dispose of used batteries according to
the manufacturer’s instructions.
•
Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces
or shall be provided with brushings.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Important Safety
Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of
the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
Handling of the unit
Be careful not to spill water or other liquids on
the unit. Be cautious not to get combustible or
metallic material inside the body. If used with
foreign matter inside, the camera is liable to fail
or to get cause of fire or electric shock.
•
Remove dust or dirt on the surface of the
lens with a blower.
•
Use a soft and lint-free, dry cloth(such as
glass cleaner) to clean the body. If it is
very dirty, use a cloth dampened with a
small quantity of neutral detergent then
wipe dry.
•
Avoid the use of volatile solvents such
as thinners, alcohol, benzene and
insecticides.
They may damage the surface finish and/
or impair the operation of the camera.
•
This camera is designed for mounting on
the ceiling or wall. If you install this camera
upside down, it may cause malfunction.
Operating and storage
location
Avoid viewing a very bright object (such as
light fittings) during an extended period. Avoid
operating or storing the unit in the following
locations.
•
Extremely hot or cold places (operating
temperature -10 °C to 55 °C, however, we
recommend that the unit be used within a
temperature range of 0 °C to 45 °C)
•
Damp or dust place
•
Places exposed to rain
•
Places subject to strong vibration
•
Close to generators of powerful
electromagnetic radiation such as radio or
TV transmitters.
•
Do not use the camera in such place
where rapid temperature fluctuation by
switching an air conditioner on and off.
Specification
Item
LND3210R
Camera
Image Device
6.4 mm (1/2.8 Type) CMOS
Lens Type
4 mm F2.0
Day/Night
ICR (Auto / Day / Night)
Minimum
Illumination
Color:
0.07 lx @ F2.0 (1/30 sec, 50 IRE)
B/W:
0 lx @ IR LED on
IR Distance
20 m
WDR
Digital (Dynamic Range Enhancer)
Image
Enhancement
Backlight Compensation, DNR, Exposure Control, AGC,
White Balance, Privacy Masking, Sharpness
Video
Compression
H.264_HIGH, H.264, MJPEG
Resolution
1920 x 1080 / 1280 x 720 / D1 (704 x 480) / CIF (352 x 240)
Maximum Frame
Rate
30 fps @ 1920 x 1080
Multi-Streaming
Up to 7
ROI (Region of
Interest)
Up to 4
Video Analytics
Motion detection, Tampering alarm
Event
Event
Notification
Email, FTP
Pre Event
Buffering
Support
Network
Ethernet
RJ-45 10 / 100 BASE-T
Security
Password Protection, HTTPS(SSL, TLS), IP filtering, IEEE 802.1X
Open Protocol
ONVIF 2.2 Profile S, PSIA 1.1
Protocol
IPv4 and IPv6:
TCP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP,
QoS, UPnP
IPv4:
FTP, SMTP, NTP, ARP, SNMPv1/v2c/v3, DDNS(LG)
Connections
Up to 10
Integrated
Software
LG Ipsolute VMS Suite / Mobile application (iPhone, iPad,
Android)
General
Power Source
DC 12 V
Maximum Power
Consumption
5.4 W
Maximum Input
Current
450 mA
Operation
Temperature/
Humidity
-10 ºC to 55 ºC / 0 % RH to 80 % RH
Dimension
(Ø x H)
140 mm x 122 mm
Weight
465 g
Note that design and specification of this unit may change from the manual as quality and
improvement without prior notice.
Components
Camera, Installation Manual, Tapping Screw (4 EA), Installation sticker, Camera mounting bracket
OWNER’S MANUAL
High
Definition
Network
Camera
To view the instructions of advanced features,
visit
http://www.lgecommercial.com
and then download Owner’s Manual / Software.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in
this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the
cost of performing such distribution (such as the cost of media, shipping and handling) upon email
request to [email protected]. This offer is valid for three (3) years from the date on which you
purchased the product.
