Operation and settings
13
Stream
LND3110R / LNU3110R only
Master/Slave
> Enable: Click to activate the stream function.
> Video codec: Select the video mode (Codec) from the drop-
down list. The viewer can choose among MJPEG, H.264 and
H.264_HIGH.
> Resolution: Select the resolution from the drop-down list.
> Maximum frame rate: Set the frame rate of the image.
Note:
Refer to the table below for the supported Framerate.
If you enter the unsupported framerate, the less Encoding
Framerate than the input is applied.
For example, when 17 fps is entered, 15 fps will be applied.
Encoding
Framerate
Sensor
Framerate
Capture Mode
30
25
4:3 or 5:4
16:9
Master
Slave
Master
Slave
30
O
N/A
O
N/A
O
O
25
O
O
O
N/A
O
O
20
O
O
O
O
O
O
15
O
O
O
O
O
O
10
O
O
O
O
O
O
5
O
O
O
O
O
O
4
O
O
O
O
O
O
3
O
O
O
O
O
O
2
O
O
O
O
O
O
1
O
O
O
O
O
O
> GOP size: It means “Group of Pictures”. The higher the GOP,
the better is the video quality of the camera. Edit the value
of GOP from 1 to 30. This setting is valid for H.264 video
format only.
> Quality: Select the Quality.
- VBR: The bit rate may vary depending on the complexity
of the video to meet the selected quality.
- CBR: The video quality may vary in order to preserve a
constant bit rate.
> Bit rate: If the [Quality] option set to CBR, this option is
displayed. If the Profile is set to [Master], can be set the
Bitrate value from 256 kbps to 10 240 kbps. In case of
[Slave], can be set from 256 kbps to 2 048 kbps.
Note:
If the ‘Bit rate’ is configured too low with high resolution,
the actual frame rate will decrease because of narrow
bandwidth. So you need to set or change the ‘Bit rate’ to
high value.
> Stream quality: If the [Quality] option set to VBR, this
option is displayed. Select the stream quality from the drop
down box, the camera supports five types. (Highest, High,
Medium, Low and Lowest)
• Save: Click this button to confirm the settings.
LND3210R / LNU3210R / LND3220R / LNU3220R only
Resolution
> HD: Displays the maximum image size of the camera.
> SD: Select the output image size of the camera.
Profile
> Enable: Click to activate the stream function.
> Video codec: Select the video mode (Codec) from the
dropdown list. The viewer can choose among MJPEG, H.264
and H.264_HIGH.
> Maximum frame rate: Set the frame rate of the image.
> GOP size: It means “Group of Pictures”. The higher the GOP,
the better is the video quality of the camera. Edit the value
of GOP from 1 to 30. This setting is valid for H.264 video
format only.
> Quality: Select the Quality.
- VBR: The bit rate may vary depending on the complexity
of the video to meet the selected quality.
- CBR: The video quality may vary in order to preserve a
constant bit rate.
> Stream quality: If the [Quality] option set to VBR, this
option is displayed. Select the stream quality from the drop
down box, the camera supports five types. (Highest, High,
Medium, Low and Lowest)
> Alias: Enter the profile name you want to use.
> Bit rate: If the [Quality] option set to CBR, this option is
displayed. Edit the bit rate value from 256 kbps to 10 240
kbps.
Note:
If the ‘Bit rate’ is configured too low with high resolution,
the actual frame rate will decrease because of narrow
bandwidth. So you need to set or change the ‘Bit rate’ to
high value.
• Save: Click this button to confirm the settings.
Содержание LND3110R
Страница 31: ......
