LG LN54 series, Руководство по установке

Страница: 14 / 16

14
INSTALLATION MENU
Configuration setup
y
Image shown may differ from your TV.
Installation Menu (V2.23)
LG Hotel Mode Setup
USB Cloning
Password Change
Set ID Setup
Configuration Setup
External Speaker
MCU Version V2.03.06
OK
Configuration Setup
Select RCU
Number of RCU
Splash Offset Time
Teletext
15Min Auto Off
Configuration Setup
Enable
1
0
Off
OK
Disable
Previous
Select RCU
Number of RCU
Splash Offset Time
Teletext
USB Auto Playback
15Min Auto Off
Configuration Setup
Enable
1
0
Off
OK
Disable
Previous
Disable
or
(1) Select RCU
y
It is a mode to set whether to use Select RCU or not. When ‘Select RCU’ is set to ‘Enable’, You can adjust ‘Number
of RCU’ menu.
(2) Number of RCU
y
It is a mode to set Number of RCU.
Number of RCU value range 1~9 (When ‘Select RCU’ is set to ‘Enable’)
Number of RCU value range 0 (When ‘Select RCU’ is set to ‘Disable’)
* RCU(Remote Control Unit) : It is special RCU that operates only setted number of RCU in TV.
(3) Splash Offset Rime
y
Sets the splash image display time.
y
The time can be set to between 0 and 10 seconds.
(4) Teletext
y
‘Teletext’ function can be operated only in Australia.
y
If Teletext is set to On or Auto, the screen automatically enters teletext mode when the teletext is available on the
channel.
y
If Teletext is set to On, the teletext mode stays enabled even when the channel signal disappears on the teletext
screen.
y
If Teletext is set to Auto, the teletext mode is disabled when the channel signal disappears on the teletext screen.
(5) USB Auto Playback
y
When ‘USB Auto Playback’ is ‘Enable’, TV finds and plays the USB’s movie files located at the first slot and
partition and root(top) directory movies if USB is pluggedin. (Some menu OSDs may prevent this function.)
y
If it reaches the last file, it starts the first file again.
(6) 15Min Auto Off
y
When ‘15Min Auto Off’ is set to ‘Enable’, TV will turn off if there is no signal in 15Min.