7-10
I. REMOVING THE VENTILATION MOTOR
(1) Remove the mounting plate by loosening 2 mounting
plate screws securing it to the back plate.
(See Figure 18)
(2) Remove blower plate by loosening two screws
securing the ventilation Motor and back plate.
(See Figure 19-a)
(3) Carefully pull the ventilation motor ASS'Y out of the
microwave oven.(See Figure 19-b)
J. REMOVING THE TURNTABLE MOTOR
(1) Remove the glass tray and plastic tray.
(2) Remove the base plate by removing 8 screws
securing it to the oven cavity.(Figure 20)
(3) Disconnect the leadwire from the turntable motor
terminals.
(4) Remove the two screws securing the turntable
motor to the oven cavity ASS'Y.(Figure 21)
NOTES:
• Remove the leadwire from the turntable motor
VERY CAREFULLY.
• Be sure to grasp the connector not the wires when
removing.
Blower plate
Figure 19-b
Figure 20
Figure 21
Wire Leads
Turntable Motor
Figure 18
Figure 19-a
Содержание LMVM2277ST
Страница 7: ...4 1 OPERATING INSTRUCTIONS CONTROL PANEL 2 3 1 4 8 9 5 12 11 6 7 10 13 14 15 17 23 19 20 16 18 22 21 ...
Страница 9: ...5 1 OVERALL CIRCUIT DIAGRAM SCHEMATIC DIAGRAM ...
Страница 36: ... 8 3 LATCH BOARD PARTS 4006 4007 4003 4011 4012 4002 4002 4013 4014 4013 4014 4008 4008 W217 W217 EV ...
Страница 40: ......