LIP Keyset User Operation
Receiving calls _ Answering a Call While Idle :
1
. Lift the handset and press the flashing Flex button (as
needed), the call will be connected.
Responding to a Call While Busy
1
.
Press
Hold/save
and/or
2
. Press the flashing CO line button
.
Answering Calls to Other Stations
To answer a call ringing at another station:
1
. Lift the handset,
2
. Dial 7 (Directed Call Pick-Up code),
3
. Dial the Intercom Number of the ringing station; the
call will be connected.
To answer a call ringing at a station in your
group:
1
. Lift the handset,
2
. Dial 566 (Group Call Pick-Up code), the call is
connected.
Using Do-Not-Disturb (DND) to Block Incoming
Calls
To toggle DND ON and OFF:
1
. Press the
DND
button.
Forwarding calls to another Station or Voice
To activate Call Forward from your phone to
another phone or internal system resource:
1
. Lift the handset,
2
. Press the
Fwd
Soft button,
3
. Dial the type of forward code 1-9 (iPECS: 1-5)
4
. Dial the destination number.
Placing Intercom calls
To place an Intercom call:
1
. Lift the handset,
2
. Dial the Intercom number of the desired station,
3
. On answer or Splash tone, speak to the called party.
Using Camp-On when calling a busy station
To Camp-On (wait off-hook) for a busy station:
1
. Press * and wait an answer.
Using Last Number Redial (LNR)
To dial the Last Number for an external call:
1
. Lift the handset,
2
. Select the
Redial
Soft button,
3
. Press
▼
volume
▲
to select from the last 10
numbers dialed,
4. Press the
Send
Soft button or hold/save.
Using System Speed Dial Numbers
To place a call using System Speed Dial:
1
. Lift the handset,
2
. Press the
Speed
button,
3. Dial the desired System Speed Dial bin number
Using and Entering Station Speed Dial
Numbers
To place a call using Station Speed Dial:
1
. Lift the handset,
2
. Press
Speed
,
3
. Dial the desired Station Speed Dial bin number
To enter a Station Speed Dial number with CO
Line and Name:
1
. Press
Trans/Pgm
,
2
. Press speed,
3
. Dial the desired Station Speed Dial bin number,
4
. Select/dial the CO line/group,
5
. Dial the desired number to be stored,
6
. Press hold/Save,
7
. Enter the associated name if desired, using the
alpha-numeric entry chart,
8
. Press hold/Save.
To assign a Station Speed Dial number directly
to a Flex button:
1
. Press
Trans/pgm
,
2
. Press the desired
Flex
button,
3
. Select the Tel Num
Soft
button,
4
. Select/dial the CO line/group,
5
. Dial the desired number,
6
. Press hold/Save,
7
. Enter the associated name if desired, using the
Character Entry chart,
8
. Press hold/Save.
ACNR: To retry a busy external number until
answered
To set up an ACNR, while on an outgoing call:
1
. Use the Navigation button to display the next menu
and select the
ACNR
Soft button,
2
. Hang-up handset.
To cancel the ACNR request:
1
. Press the
ACNR
Soft button
.
Call Transfer: Sending a call to a different
destination
To Transfer an active call:
1
. Press
Trans/pgm
,
2
. Call receiving party,
3
. Hang-up with or without announcement.
Call Hold: Placing a call in a waiting state
To place a call on Hold:
1
. Press
Hold/save
.
Joining Multiple People in a Conference
To establish a Conference:
1
. Establish call with one of the desired conference
parties,
2
. Select the
Conf
Soft button,
3
. Establish call with the other conference party,
4
. Select the
Conf
Soft button,
5
. Select the
Conf
Soft button again to establish the
conference
.
To place a Conference on Hold:
1
. Press the hold/save button.
To retrieve the Conference:
1
. Select the
Conf
Soft button.
To make an External-parties-only Conference:
1
. Establish conference with two external parties,
2
. Select the
Conf
Soft button to exit.
To enter pre-opened Conference Room:
1
. Dial 5 7 X (iPECS: 5 9 X) when X is the conference
room number.
