Mini Glossary for Audio Stream &
Surround mode
Allows you to enjoy 5.1(or 6) discrete channels of high
quality digital audio from DTS program sources such as
discs, DVD and compact discs, etc.bearing the trade-
mark. DTS Digital Surround delivers up to 6 channels of
transparent audio(which means identical to the original
masters) and results in exceptional clarity throughout a
true 360 degree sound field. The term DTS is a trade-
mark of DTS Technology, LLC. Manufactured under
license from DTS Technology, LLC.
The Dolby Digital surround format lets you enjoy up to
5.1 channels of digital surround sound from a Dolby
Digital program source. If you play DVDs with “
”
mark, you can enjoy even better sound quality, greater
spatial accuracy, and improved dynamic range.
(
II
)
Dolby Pro Logic II creates five full-bandwidth output
channels from two-channel sources. This is done using
an advanced, high-purity matrix surround decoder that
extracts the spatial properties of the original recording
without adding any new sounds or tonal colorations.
MOVIE mode:
The Movie mode is for use with stereo television
shows and all programs encoded in Dolby Surround.
The result is enhanced soundfield directionality that
approaches the quality of discrete 5.1-channel sound.
MUSIC mode:
The Music mode is for use with any stereo music
recordings.
MATRIX mode:
The Matrix mode is the same as the Music mode
except that the directional enhancement logic is
turned off. It may be used to enhance mono signals
by making them seem “larger.” The Matrix mode may
also find use in auto systems, where the fluctuations
from poor FM stereo reception can otherwise cause
disturbing surround signals from a logic decoder. The
ultimate “cure” for poor FM stereo reception may be
simply to force the audio to mono.
BYPASS
Software with multichannel surround audio signals is
played according to the way it was recorded.
Sound Mode
You can enjoy surround sound simply by selecting one
of the pre-programmed sound fields according to the
program you want to listen to.
When DVD is inserted
You can change the Digital Audio Output mode by
pressing the
AUDIO
button on the remote control during
playback. Although the DVD contents differ from disc to
disc, the following explains the basic operation when
this feature is used.
a) After you select 2 channel (For example
or
) by pressing AUDIO button, press SOUND
button repeatedly.
b) After you select 5.1 channel (For example
or
) by pressing AUDIO button, press SOUND button.
- “
” indicator will be displayed on the TV screen.
- “
BYPASS
” indicator will be only displayed on the display
window.
When Video CD is inserted
Each time you press SOUND button, the sound mode of
Video CD is changed on the display window in the fol-
lowing order.
BYPASS
→
STUDIO
→
CLUB
→
HALL
→
THEATER 1
→
CHURCH
→
PL ll MOVIE
→
PL ll MUSIC
→
PL ll MTRX
→
BYPASS...
ote
After you select the “Bypass” of sound mode by
pressing SOUND button, press AUDIO button.
The Left, Right and Stereo of audio channel will be
displayed on the TV screen.
When CD is inserted
Each time you press SOUND button, the sound mode of
Audio CD is changed on the display window in the fol-
lowing order.
BYPASS
→
STUDIO
→
CLUB
→
HALL
→
THEATER 1
→
CHURCH
→
PL ll MOVIE
→
PL ll MUSIC
→
PL ll MTRX
→
BYPASS...
For your reference
• You can identify the encoding format of program
software by looking at its packaging.
- Dolby Digital discs are labeled with the
logo.
- Dolby Surround encoded programs are labeled with
the logo.
- DTS Digital Surround discs are marked with DTS.
otes
When you play sound tracks with 96kHz sampling frequency,
the output signals will be converted to 48kHz (sampling
frequency).
When you use a microphone, you can’t enjoy 5.1 channel
output. Only 2 channel sound will out by the influence of the
microphone system.
4 ENG
DTS
5.1 CH
1 ENG
D
5.1 CH
Matrix
Music
Movie
Bypass
3 ENG
D
2 CH
2 ENG
D
2 CH
CD
VCD1.1
VCD2.0
DVD
12
Before Operation
