03
SafETY
The instructions related to safety and use indicated
in the this installation manual are intended for the
prevention of unexpected danger, damage, or failure.
DaNgEr
WarNINg
CaUTION
Non-compliance with the instructions may cause product
damage, product failure, and/or serious bodily injury or
death.
DaNgEr
Do not contact electrically active
parts of the panel, such as
terminals, without appropriate
safety gear. Contact may result in
lethal spark or electric shock.
Do not use or install if the module
is broken or torn. Failure to
comply may result in electric
shock.
WarNINg
Perform all work in dry conditions
and use only dry tools. Do
not handle wet panels without
appropriate protection equipment.
Failure to comply may result in
accident or death.
Damaged modules must be
treated with safety protection
equipment. Failure to comply
may result in serious bodily injury
or death.
Do not approach the damaged
or broken module unless you are
an authorized or qualified expert.
Failure to comply may result in
serious bodily injury or death.
No electrical parts like cables are
located after installation between
laminate and mounting structure.
Do Not reconnect or repair
junction box cable. It may occur
spark or electric shock.
Do not bending junction box's
cable. While under stress, it may
occur module damage. Cable
bending radius should be more
than 4 times the cable diameter,
at least.
CaUTION
Use proper equipment,
connectors, wires and buttresses
for the installation of the module.
Failure to comply may result in
product damage, product failure
or bodily injury.
Installation during rain, heavy
wind or snowy day may result in
bodily injury or death.
Holes in the frame or glass of
the module may decrease the
strength of the frame or break the
glass.
