41
Connections
Audio Connection to Optional Equipment
Connect the DVD player to your optional equipment for audio output.
You must set the A/V IN/OUT switch to the “OUT” mode
Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic
ll / Pro Logic
: Connect the AUDIO OUT jacks on the DVD player to
the audio left and right IN jacks on your amplifier, receiver, or stereo
system, using the audio cables.
Amplifier equipped with 2-channel digital stereo (PCM) or audio /
video receiver equipped with a multi-channel decoder (Dolby
Digital™, MPEG 2, or DTS)
: Connect one of the DVD Player’s
DIGITAL AUDIO OUT jack to the corresponding in jack on your
amplifier. Use an optional digital audio cable.
Digital Multi-channel sound
A digital multi-channel connection provides the best sound quality. For
this you need a multi-channel audio / video receiver that supports one or
more of the audio formats supported by your DVD player such as MPEG
2, Dolby Digital and DTS. Check the receiver manual and the logos on
the front of the receiver.
NOTES
•
If the audio format of the digital output does not match the capabilities of
your receiver, the receiver produces a strong, distorted sound or no sound
at all.
• Six Channel Digital Surround Sound via a digital connection can only
be obtained if your receiver is equipped with a Digital Multi-channel
decoder.
• To see the audio format of the current DVD in the on-screen display,
press AUDIO.
Setting up the Player (continued)
Optical cable
(Not supplied)
Audio/ Video cable
(Supplied)
or
(Black)