2. PERFORMANCE
- 36 -
Copyright © 2013 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
Parameter
Spec.
Rx Min input Sensitivity
PER ≤ 10%
[email protected], [email protected], [email protected]
-68dBm@117Mbps, [email protected], -60dBm@234Mbps
[email protected], [email protected], -53dBm@351Mbps,
-51dBm@390Mbps
Rx Max input Sensitivity
≥ -30dBm @ PER ≤ 10%(5170 ~ 5815 MHz)
Rx Adjacent Channel
Rejection
PER ≤ 10%,
ACR ≥ [email protected], ACR ≥ [email protected],
ACR ≥ [email protected], ACR ≥ 8dB@117Mbps,
ACR ≥ [email protected], ACR ≥ 0dB@234Mbps
ACR ≥ [email protected], ACR ≥ [email protected]
ACR ≥ -7dB@351Mbps, ACR ≥ -9dB@390Mbps
*ACR shall be measured by setting the desired signal’s strength 3 dB above the
rate-dependent sensitivity specified in min input sensitivity
17) NFC
Operate below 3 mode.
1) Card mode : Smart Card capability for mobile device(recognition distance : over 20mm)
2) Reader mode : Get information from tag(recognition distance : over 20mm)
3) Peer-to-peer mode : Device to device communication(recognition distance : over 5mm)