is open. “Always on” means that the backlight is on regardless of the Status of Cellcase. Choosing
“Always on” significantly decreases talk time. “Always off” means that the backlight is never on.
Contrast( [Menu] [2]+ [2] )
Banner ( [Menu]+ [2]+[3] )
Theme ( [Menu]+ [2]+[4] )
You can set up the screen displayed on the LCD screen in the standby mode.(Default, Star theme)
Language ( [Menu]+ [2]+[5] )
Version ( [Menu]+ [2]+[6] )
View the software and PRL version.
Features ([Menu]+[3])
Data ([Menu]+ [3] +[1])
In “Data/Fax” setting, data and fax can be transmitted. Wireless data communication services refer
to utilization of subscriber terminals for access to internet with personal computer or laptops at
8Kbps or at maximum of 13Kbps.
??
Data In : This setting enables the subscriber terminal to receive data calls.
??
Fax In : This setting enables the subscriber terminal to receive fax transmittals.
Auto Answer ([Menu]+ [3] +[2])
Select the ring type before the phone automatically answers a call. This feature is most commonly
used with the car kit.
off
??
after 1 ring(or melody 5 seconds)
??
after 3 rings(or melody 10 seconds)
??
Machine Enable
When you have incoming call, the phone automatically response with pre-recorded voice message
and record caller’s speech after 3 rings.
Auto Retry ([Menu]+ [3]+[3])
Set the length of time the phone waits before automatically redialing a number when the
attempted call fails.
??
off / every 10 seconds / every 30 seconds / every 60 seconds
One-Touch ([Menu]+ [3]+[4])
Enable/Disable one-touch dialing.
Voice Privacy ([Menu]+ [3]+[5])
Set the voice privacy feature for CDMA calls as “Enhanced” or “Standard : CDMA offers inherent
voice privacy. Check with your service provider for availability of the enhanced voice privacy mode.
Audio AGC ([Menu]+ [3]+[6])
SIO Config ([Menu]+ [3]+[7])
If you want to use HSPD mode, you should set the baud rate as 230,400 bps in the menu 2 (Data
Baud menu).
