LG LG-S367 Скачать руководство пользователя страница 20

Страница: 20 / 177

- 0 -

LGE Internal Use Only

Only for training and service purposes

3. TECHNICAL BRIEF

Linear voltage Regulators (low dropout) LDOs

The LDOs are used to generate the supply for the different supply domains not directly supplied out of the
DC/DC converter.

LCORE

The LCORE LDO provides the VCORE supply used for most of the digital parts of the chip

LPMU

The LPMU provides VPMU sued for the PMU supply, e.g. for the startup state machine and analog parts like

ADC, sense amplifier etc.

LUSB

The LUSB LDO generates the supply for the USB transceiver (output driver and input). If no USB interface is

required, LUSB can be used as general purpose LDO.

LAUX

The LAUX generates VAUX. It is a general purpose LDO and can be used for different functions depending on

the phone application, e.g. for the display or Camera.

LMMC

The LMMC generates VMMC. It is a general purpose LDO and can be used e,g. for memory cards

LSIM

The LSIM LDO generates the VSIM supply for the SIM card and interface. It is designed to supply Standard SIM

cards.

Other LDOs

The RF module has implemented several LDO’s for different RF Power domain.

The mixed signal module has some LDO’s for the audio driver and microphone supply.
The FM receiver has an internal LDO for sensitive RF circuits.

Содержание LG-S367




































































































































































Результаты поиска

Содержание LG-S367

Отзывы:

LG LG-S367, Руководство по обслуживанию, Страница: 20 / 177

Результаты поиска

Содержание LG-S367

Отзывы: