manualshive.com logo in svg

LG LG-MC2670, Руководство по обслуживанию

Поделиться
Скачать
LG LG-MC2670 Скачать руководство пользователя страница 9

LG-

MC

26

7

0 

2. Digital/Voice Processing Part 

 

2.1 Overview

 

 

The digital/voice processing part processes the user's commands and processes all the digital and 

voice signal processing in order to operate in the phone. The digital/voice processing part is made up 

of a keypad/LCD, receptacle part, voice processing part, mobile station modem part, memory part, 

and power supply part. 

 

2.2 Configuration 

 

 
2.2.1 Keypad/LCD and Receptacle Part   

This is used to transmit keypad signals to MSM6000. It is made up of a keypad backlight part that 

illuminates the keypad, LCD part that displays the operation status on to the screen, and a receptacle 

that receives and sends out voice and data with external sources.   

 

2.2.2 Voice Processing Part 

The voice processing part is made up of an audio codec in MSM6000 used to convert MIC signals into 

digital voice signals and digital voice signals into analog voice signals,   

amplifying parts for amplifying the voice signals and MIC signals are on Codec in MSM6000. 

 

2.2.3 MSM6000 (Mobile Station Modem) Part   

MSM6000 is the core elements of a CDMA mobile station and carries out the functions of CPU, 

encoder, interleaver, deinterleaver, Viterbi decoder, Mod/Demod, codec, and vocoder. 

 

2.2.4 Memory Part 

The memory part is made up of a flash memory and a SRAM 

 

2.2.5 Power Supply Part   

The PMIC(PM6610-2) is made up of 7 Regulators and direct connet to Batt. 

Regulator(150mA)s give the power each Circuits(RFT6122/RFR6122). 

Regulator(150mA) gives the power to the MSM and memory parts.   

PAM, Motor, LCD back light LED, Indicator LED, Keypad LED and Audio amplifier are directly 

conneted to Battery. 

 

2.3 Circuit Description 

 

2.3.1 Keypad/LCD and Receptacle Part   

Once the keypad is pressed, the key signals are sent out to MSM6000 for processing. In addition, 

when the key is pressed, the keypad lights up through the use of 10 LEDs. The status and operation 

of a mobile station are displayed on the screen for the user with the characters and icons on the LCD. 

6

Z3X-BOX.COM

Содержание LG-MC2670











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды