- 9 3 -
13-2 ICE MAKER FUNCTIONS
13-2-1 Icemaking Mode
1. Icemaking Mode begins right after the ice tray fills with water.
2. Icemaker waits until water becomes ice in the ice tray.
※
Ice-detecting sensor checks if the ice bin is full every 2min.
13-2-2 Harvest Mode
At least in 110min, since icemaker begun icemaking mode, Icemaker starts to twist the ice tray to drop ices into the Ice bin.
(After installation, at least 1day is needed to make ices)
※
If the icemaker never drop ices to the ice bin though water becomes ices in the ice tray, check the real temperature of
compartment. (not temperature on display)
Icemaker needs below 0°F to drop ices to ice bin.
13-3 Trouble Shooting Ice & Water system Issues
13-3-1 Icemaker not making ice or not making enough ice (Environmental Diagnosis)
Icemaker can’t make ices itself. Basically, water, temperature and time are needed.
- Water : If no Water, then no Ice.
- Temperature : The compartment, where the icemaker is located, has to be at least 1°F so that icemaker dumps ices to
the bin.
- Time : At least 80 minutes must be passed to make one series of ices after water comes into icemaker.
※
Test Mode should not be carried out before checking below.
13-2-3 Fill/Park Position
Once the normal harvest mode has been completed, the water solenoid will be activated.
Not making ice
Water
Yes
Yes
No
No
No
Temperature
Time
Is Icemaker’s tray filled
with water or Ice?
Is measured
temperature below 10°F
in the icemaker
compartment
How long has customer
waited for icemaker to
make ices?
1. Is saddle valve turned on?
→
Check
saddle valve.
2. Is the icemaker fill tube frozen?
→
Check the
fill tube heater’s electrical
resistance.
3. Are water valve housings are connected properly?
→
Check
all the water valve’
connection.
4. Water line kinked or damaged?
5. Is water filter too old?
1. Does cold air come out from air vent normally?
→
Check if
Icing fan is working.
Check if
multi duct is blocked.
2. Are the R & F room cold enough?
→
Measure the temp. and Check gas leakage
at the back.
3. Does icemaker compartment door close tightly?
1. At least 120min. must be passed to make ices after water comes into icemaker.
2. At least 24 hours must be passed to have ice bin full of ices. (not in case of
installation)
If the issue haven’t resolved yet, though you have checked all the items above, go to next step.
Содержание LFXS28566 Series
Страница 7: ... 7 ...
Страница 23: ... P N EBR76468403 7 PCB Picture 7 3 Sub PCB CON1 CON2 ...
Страница 75: ... 75 11 3 Door Heater Assembly 1 9 2 2KΩ ...
Страница 108: ...Jun 2017 Printed in China ...