LG LE4008 Series, Руководство пользователя

Страница: 33 / 88

Installation 33
3
Ins
talla
tion
ATM/POS
• Interface Device: Select the interface device from the drop-
down list.
- NONE: Selects when the ATM/POS device is connected with
the DVR directly.
-
AVE Hydra: Selects when the ATM/POS device is connected
via the AVE Hydra device to the DVR. If you set to AVE Hydra,
the [Camera], [Baud Rate], [Data Bits], [Stop Bits] and [Parity]
options are dimmed and these options are not set.
• Camera: Select the camera number for mapping with ATM/POS
device.
• Baud Rate: Select the desired parameter to set the
communication speed between DVR and ATM/POS device.
• Data Bits: Select the number of the data bits for RS-485
communication.
• Stop Bits: Select the desired parameter. The stop bit, added to
the last of data, in asynchronous communication.
• Parity: Select the desired parameter. The parity bit, added to the
data, to perform parity check.
Storage
• Storage: Selects the E-SATA device or internal device name.
• Serial Number: Displays the serial number of the selected
storage.
• Overwrite:
-
ALL: Overwrite recording is possible when the normal
partition and event partition of HDD have fully recorded.
- NORMAL PARTITION: Overwrite recording is possible for
normal partition of HDD when the normal partition of HDD
has fully recorded.
- EVENT PARTITION: Overwrite recording is possible for event
partition of HDD when the event partition of HDD has fully
recorded.
- OFF: Do not use overwriting.
• Full Warning: When the HDD has overflowed a warning message
is displayed.
• Auto Delete: Set the auto delete date. If you set the auto delete
date, the recorded data will be deleted except the data within
the selected date period of time. The Auto Delete function is
activated every 35 minutes.
• Event Partition: Set the space of event partition for event
recording. The motion and sensor recording data are saved in
the event partition area of the HDD. You should set the space of
event partition before event recording.
• Format: Initializes the HDD (Hard Disk Drive). All data on the
HDD will be erased.
• Insert: Use the selected E-SATA storage for recording data.
• Eject: Use the selected E-SATA storage for data back-up.
NOTE
If you change the value of event partition, the current recorded
data of HDD is deleted and the partition is reset. The partitions will
be formatted automatically and the system will be restarted.
How to format the HDD
1. Select the [Event Partition] option and set the event partition
rate of the HDD. If you set the event partition to 60 %, the
remaining space of 40 % is set to normal partition automatically.
• Event Partition: To save space of the HDD for motion and
sensor recording data.
• Normal Partition: To save space of the HDD for instant or
normal recording data.
2. Select the [Format] icon and press ENTER.
3. Select [OK] and press ENTER to start format.