LG LDF9932, Руководство по обучению

Страница: 9 / 66

TRAINING MANUAL LDF9932XX
LDF9932XX Page 9 DISHWASHER
DRAIN CONNECTION
The drain hose must be connected in a manner that meets local plumbing codes. If the
end of the drain hose does not fit the available connector, an adapter may be obtained
from a local hardware or plumbing supplier.
The rubber end can be cut off for the
correct size attachment.
This drawing shows the drain line installed
with a rise in the drain pipe but no air gap.
It can also be with an air gap installed. Be
sure to observe the clearances listed.
Most garbage disposers have a
dishwasher drain fitting built in to them.
If your installation does not include a
disposer, you can use a special tailpiece
with a drain attachment available at most
hardware and home supply stores.
WATER CONNECTION
Turn off the water supply and connect the
elbow to the inlet valve.
Connect the flexible supply tube to the
elbow.
Use sealing tape to make all connections.
Make sure the supply line is not kinked.
ELECTRICAL CONNECTION
Use wire
connectors and
replace the cover
on the junction
box.
(12/2 w/ ground,
20-amps)