Part 1
SAFETY
3
ENGLISH
WARNING
• The middle (neutral or ground) wire of a 3 wire power cord or a 3 wire conduit has to be
connected to the middle post of the main terminal block. The remaining two wires of the
power cord or conduit have to be connected to the outside posts of the main terminal
connection block.
- Failure to do so can result in electrical shock, severe personal injury or death.
• Only a 4-conductor power-supply cord kit rated 120/240 volts, 50 amperes and marked for use
with ranges with closed-loop connectors or open-end spade lugs with upturned ends shall be
used. The middle (neutral) wire of the power cord or 4-wire conduit has to be connected to the
middle post of the main terminal block. The other two wires of the power cord or conduit have
to be connected to the outside posts of the main terminal connection block. The 4th ground
wire must be connected to the frame of the range with the ground screw.
- Failure to do so can result in electrical shock, severe personal injury or death.
CAUTION
• You should put on gloves during the installation procedure.
- Failure to do so can result in bodily injury.
• You should make sure that the wall covering, countertop and cabinets around the range
can withstand the heat (up to 194°F) generated by the range.
- Discoloration, delamination or melting may occur.
- This range has been designed to comply with the maximum allowable wood cabinet temperatures of 194°F.
• Cabinet storage space located above the surface units should be avoided.
• You should install a range hood that projects horizontally a minimum of 5 inches
beyond the bottom of the cabinets. If cabinet Storage is to be provided.
- The risk of burns or fire by reaching over the heated surface elements can be reduced.
• You should not install the range in the humid place. Splashing the range with water or
any electrolyte can result in electrical shock.
• You should not let cooking grease or flammable material accumulate in or near the
range.
- Failure to do so can result in serious burns.
