22
USER MAINTENANCE INSTRUCTIONS
To prevent trouble and poor operating, it is important to check filters and spray
arms at regular intervals.
Filters
• Remove the lower rack first.
• Remove the filter by pulling up.
• Take out the mesh filter, upper STS filter
and outer filter.
• Clean them if necessary.
• Replace them in the reverse order.
ATTENTION:Do not put the fine filter up side down.
Protect against Freezing
If your dishwasher is left in non heated place during the
winter, ask a service technician to:
1. Cut off electrical power to the dishwasher.
2. Turn off the water supply and disconnect
the water inlet pipe from the water valve.
3. Drain water from the inlet pipe and water valve.
(Use a pan to catch the water.)
4. Reconnect the water inlet Water valve.
5. Remove the filter in the and use a sponge
to soak up water In sump.
Upper Spray Arm
• Pull the upper rack forwards.
• Check that the water jet holes are not
blocked.
• If cleaning is required, remove the arm by
unscrewing the nut.
• Clean the spray arm and replace it in the
reverse order.
Lower Spray Arm
• Check that the water jet holes are not
blocked.
• If cleaning is required, remove the arm by
pulling up.
• Clean the spray arm and replace it pulling
down.
■
After each cycle, clean the filter for the
better washing result.
■
Before starting, check that the filter is
assembled well. If the filter is not
assembled correctly, you might have a
poor cleaning result.