11
Spray
Indicator
Beep On/Off
Half Load
Child Lock
Sanitization
Delay Start
Power
Time Left
Power
• For operating, press this button first for power on.
• After operating, this button automatically switches off for safety and energy saving.
• In case of irregular surge disturbance to the machine, the power may be automatically turned off for safety.
Beep On/Off
• The dishwasher must be switched on.
• The beep on/off function can be set by pressing the
Half Load
and
Power
button simultaneously for a few
seconds. Then, a “On” will appear in the display.
• The beep on/off function is automatically canceled when power failure occur.
Half Load
• In case of small load, use upper or lower rack only to save energy.
• With each press, can select
Upper
or
Lower
rack only.
• In case you don’t select this button, the machine always works vario washing, which operate upper and lower spray
arm alternately.
Child Lock
• Used to lock or unlock the control buttons to prevent all the setting from being changed by a child.
• This function is automatically canceled when power failure occur.
• For locking/ unlocking, press
Spray
and
Sani.
button for a few seconds simultaneously.
Sanitization
• Repeated pressing of the
Sani.
button will select
UV
,
Extra Hot
,
UV
&
Extra Hot
.
• If you select the
UV
function, sterilizer will be performed by
UV
lamp after drying cycle.
• If you select the
Extra Hot
function, the operating temperature will be up to 80 .