HOW TO USE AND OPERATE
15
7. Adding Rinse Aid
Dispenser
�
For filling
To fill the Rinse Aid chamber, rotate the
round cap counter clockwise and remove.
Fill the container to the maximum level
with a good quality Rinse Aid, then replace
and lock the cap.
The Rinse Aid is automatically dispensed
during the final rinse cycle.
The dosage is factory set to suit most
installations. If, after washing, you notice
cloudy spots, streaks or water marks on
your glassware, it may be necessary to
increase the setting. To do this, remove the
cap and rotate the indicator arrow to a
higher setting then replace the cap . If the
glasses are smeared or foam is present on
the bottom of the glass or the bottom of the
machine, select a lower setting.
�
For refilling
Depending on the dosage setting and the
number of washes, the chamber may need
to be topped up, approximately once a
month. The rinse aid level can be checked
by two methods.
• By the indicator window on the dispenser
when the dishwasher door is fully open.
●
Black indicates sufficient Rinse Aid
O
Clear indicates Rinse Aid required
• By the light on the control panel, being
lit, when the dishwasher is working on.
Rinse Aid Information
Rinse Aid is necessary to remove spots and
streaks from dishes as well as improved
drying. Using the correct amount will
improve wash performance. However, using
too much can produce excess foam leading
to possible water leaks.
When the lamp is lit, it means the rinse aid
is almost empty. Refill the Rinse Aid
chamber as soon as possible.
MFL30149778
2008.1.31
11:41
AM
페이지15
001
GateRip_A4
