Press the “Power” button
Check there is rinse aid
and salt
The corresponding indicator lights will
illuminate if refilling is required.
Open the door and check
the filters
Ensure they are clean and properly
positioned (See “User Maintenance
Instructions”).
Load the dishes
Remove any excess food.
Pull the lower rack out and arrange the
dishes and cutlery.
Pull the upper rack out and arrange the
cups, glasses, etc.
Before starting, the display window shows
the running time of the selected program.
After starting, the display window shows
the remaining time.
The time in the display window will start
to decrease minute by minute.
If the door is opened during the program a
safety device ensures that the machine
stops.
Once the door is re-closed the program
will start from where it was interrupted.
At the end of the washing
program
“End”is displayed on the digital display
and a buzzer sounds. The display then
shows “Cd” to indicate that the dishwasher
is in “Cool dry” mode.
Cool dry-“Cd”
This process is not part of the program.
At this time, the fan will operate for a few
more minutes to diminish any remaining
moisture.
If you want, you can now open and unload
the dishwasher.
Otherwise the dishwasher automatically
switches off for safety and energy saving
later.
Ensure the spray arms can
freely rotate
Measure out detergent
Add the required amount of detergent into
the dispenser and close the lid.
Setting and starting the
program
Press the program button to select the
desired program.
After 3 seconds, the machine will start.
If necessary, select the option function
corresponding to the desired program.
The indicator lights of the program and all
the phases of the program will come on.
CAUTION
Do not load the items in upper rack with
the lower rack is pulled out and loaded.
CAUTION
Empty the lower rack first and then the
upper one;this will avoid water dripping
from the upper rack onto the dishes
below.
WARNING
In general it is not advisable to open the
door while the machine is working.
If the door is opened, a safety device
ensures that the machine stops.
Care must be taken if the door is opened
during the hot phase or immediately after
a program has finished, as steam may
escape.
OPERATING SEQUENCE
17
Содержание LD-2151MH
Страница 21: ...21 MEMO ...
Страница 43: ... ﻣﺬﻛﺮة ...