HOW TO USE AND OPERATE
16
When the salt container is empty, the salt refill lamp will automatically turn on during operation.
The salt should be refilled after the cycle has finished. We recommended the salt refill should
always be carried out, as mentioned previous page, piior to starting the next operation. This will
immediately thin and drain away any excess salt solution.
■
For refilling
Note
• After filling with salt, it may take a little while before the indicating lamp goes out.
• When the control is set to “ ”, it is not necessary to fill up with salt as none will be consumed while the dishwasher is operating.
If the control is set between “ ” and “ ”, then salt must be added to the dispenser.
9. Fold down dividers.
(Not on all models)
■
Fold-down dividers at the lower rack can
be lowered to improve stacking of pots
and pans.
11. Energy Test(EN50242)
■
Appliance loaded in accordance with
standard specifications.
• Example of loaded dishwasher : p.11~12
• Capacity : 12 place settings
• Comparability course : Eco
• Rinse Aid setting : 3
• Reference cleaner : 6g of detergent onto
the inside surface of the door and fill 24g
into the detergent dispenser.
• Height-adjustable Rack-U must be
inserted into the uppermost position.
10. Drying
■
To assist drying, we recommended that
the door be fully opened after the cycle.
WARNING
Do not pour detergent into the salt container. This will destroy the water softener.
When the lamp is lit, this means that the salt
aid is almost empty. Refill the Salt Aid
chamber as soon as possible.
