LG LD-2051MH, Руководство пользователя, Страница: 5 / 12

9 8
Funnel
PARTS NAME
1. Control Panel
2. Vapor vent
3. Door Handle
4. Front Cover
5. Lower Cover
6. Process Monitor
7. Power Switch
8. Drain hose
9. Aquastop
10. Power Cord
11. Adjust Leg
12. Upper Rack
13. Cutlery Rack
14. Detergent & Rinse Aid Dispenser
15. Vapor Vent Cover
16. Upper Spray Arm
17. Lower Spray Arm
18. Filter ASM
19. Lower Rack
20. Salt Container Cap
INSTALLATION INSTRUCTIONS
Step 6 :
WATER SUPPLY CONNECTION
1
2
Connect the water supply hose to the
water tap as shown in figure.(Some
models consist of an inlet valve and hose.)
This dishwasher may be fed with either
hot or cold water. If the water can not be
maintained below 65ºC, the dishwasher
must be connected to cold water.
When connecting, the sealing tape or
sealing compound should be used to avoid
water leaks.
Make sure that the line is not kinked or
sharply bent.
Step 7 :
FINAL CHECK AND ASSEMBLING
1
2
Securely hand tighten supply hose to
water supply.
Plug power supply cord into an
earthed the power plug and switch on.
After installing the product, operate
the dishwasher through one cycle
(Quick cycle is recommended) without
loading the dishes.
Through this, you can check for water
leak and operating conditions.
When you operate the product the
first, the noise may be occurred.
In that case, turn off power switch and
restart the dishwasher.
Step 8 :
HOW TO LEVEL THE PRODUCT
After installing the product, if you feel some
sticky or hear a frictional sound between the
side portion of door and tub when you open or
close the door, you have to adjust the level of
product.
• If the door is slanted to the right as shown in
figure C, repeat the procedure shown as below
until the door is operated normally.
1) Unscrew(counter-clockwise) the left leg of
back side and high the level.
2) Check the opening of door if there still
remains sticky or friction sound.
• When the product is correctly leveled, there do
not remain slant, stickiness or a friction sound.
• If the door is slanted to the left as shown in
figure D, repeat the procedure shown as below
until the door is operated normally.
1) Unscrew(counter-clockwise) the right leg of
back side and high the level.
2) Check the opening of door if there still
remains sticky or friction sound.
• When the product is correctly leveled, there do
not remain slant, stickiness or a friction sound.
Fig. C
Fig. D
Case 1. In case the door is slanted to the right
Case 2. In case the door is slanted to the left
Installation Instructions
Parts Name
Water tap
Water supply
hose
Slant to
the right
Slant to
the right
DOOR
DOOR
※
The appearance and specifications may be varied without notice according to localities.