background image

11

Delay Start

• If you want to delay the start of selected program, press this button.
• Pressing this button to increase the starting time by 1 hour increasements.
• The delay start time can be adjusted from 1 hour to 19 hours.

Program

• Press the cycle that corresponds to your desired wash cycle.

Extra Hot

• If you select the Extra Hot function, the operating temperature will be up to 80ºC. 

(Dual Intensity, Auto, Eco50)

Beep On/Off

• The dishwasher must be switched on.
• The beep on/off function can be set by pressing the 

Eco

and 

Gentle

button simultaneously for a few

seconds. Then, an “On” will appear in the display.

• The beep on/off function is automatically canceled when power failure occur.

Child Lock

• Used to lock or unlock the control buttons to prevent all the setting from being changed during the cycle.
• To activate or release the 

Child Lock

function, press the 

Gentle 

and

Quick

buttons simultaneously for

a few seconds while the dishwasher is in operation.

• All controls will be disabled except the 

Child Lock

and 

Power

buttons.

• Turning off the dishwasher will not reset the 

Child Lock

function. You must release the 

Child Lock

before you can operate the dishwasher.

Power

• For operating, press this button first for power on.
• After operating, this button automatically switches off for safety and energy saving.
• In case of irregular surge disturbance to the machine, the power may be automatically turned off for safety.

Содержание LD-1419B2





























Отзывы: