LG LD-05AW2, Руководство пользователя

Страница: 5 / 16

INSTALLATION INSTRUCTIONS
5
Installation Instructions
Step 1 :
PREPARE ELECTRICAL WIRING
Step 2 :
INSTALLATION
1
1
2
3
2
3
This appliance must be supplied with
correct rating voltage and hertz as shown
on instruction manual, and connected to
an individual, properly grounded branch
circuit, protected by minimum 15 amp
circuit breaker or time delay fuse.
Wiring must be 2 wires with ground.
The power point must be in a accessible
location adjacent to and not behind the
dishwasher and within 1.2 meters of the
dishwasher side.
The power point must be correctly
earthed, if in doubt, have it checked by a
qualified Electrician. No other appliance
should be connected to the same plug
outlet by a double adapter or similar
plug.
CAUTION
For personal safety, remove house fuse or
open circuit breaker before installation. Do not
use an extension cord or adapter plug with
this appliance. Electrical and grounding
connections must comply with the national
electrical code/provincial and municipal code
and/or other local codes.
Connect the water supply hose to the
water faucet. ( The supply water
temperature should be below 65
to
avoid troubles. )
Connect the drain hose to the sink or
drain pipe. The drain height should be
between. 50 ~ 90 cm from the floor. If
not, the water may not be naturally
drained before operating.
Set the machine in the place you want to
install it . Then the machine should be
horizontally leveled.
3cm
Water Supply Hose
Drain Hose